Designed primarily for school use this bench is a lighter and economical alternative to the Traditional Balance Bench. Manufactured from natural selected timber from sustainable sources, this bench is designed without side rails to minimise weight. The balance rail on the underside is 100mm wide so that the bench can also be used inverted. Non marking rubber feet for stability and non marking rubber buttons on the top to prevent damage.
Available in natural with a clear varnish finish, or in team colours with the colour applied in the form of colour stain and varnish which will not chip or crack. All the benches can also be supplied with castors (the castors engage only when the opposite end of the bench is lifted).
Dimensions: 2000mm or 2500mm long x 340mm high x 240mm wide at the top and 330mm wide at the base.
Weight: 2m bench - 14kg
2.5m bench - 18kg
Tested to BS EN 913
A really versatile balance beam which can be used as a floor beam, or as a linking element between pieces of equipment. Powder coated steel feet with non-marking rubber bungs for stability with a natural timber beam, the top surface of which is 100mm wide. Dimensions : Beam section is 1830mm long x 100mm wide x 100mm high, overall length 1930mm. Weight : 6.51kg approx.
Manufactured using computer-controlled machinery from a timber-based material that will not warp, split or shrink. A low cost option to traditional benches especially suitable for the nursery and primary school markets. Complete with a 100mm (4”) balance rail underneath and rubber buttons on the top. Hooks at one end enabling the bench to be attached to other items of equipment. Castors can also be supplied at one end. Bench top width 230mm, height 290mm.
\nWeight for 1.8m bench is 15kg
\nWeight for 2.4m bench is 20kg
These traditional balance benches are superbly constructed to the highest standards. Each bench leg is jointed into both the bench top and the bench foot. This method of construction, combines with a dovetailed balance rail, produces a bench with optimum structural stability. Hardwood fillets in the bench top ends prevent splitting. Rubber buttons avoid damage to the bench top when the bench is inverted.